Ir. Waluyo Adi Siswanto, M.Eng, PhD
Associate Professor
Desain Dan Teknonologi Manufaktur (DeTeM)
: was123@umkt.ac.id
Jenjang | Jurusan | Tempat Studi | Negara | Tahun Lulus |
---|---|---|---|---|
S3 | Teknik Mesin | Royal Melbourne Institute Of Technology | - | 2001 |
S2 | Teknik Mesin | Royal Melbourne Institute Of Technology | - | 1997 |
S1 | Teknik Mesin | UGM | - | 1990 |
No | Tahun | Book | Link |
---|---|---|---|
1 | 2018 | Teori dan Aplikasi Dinamika Teknik dengan Contoh dalam SMath Waluyo Adi Siswanto Muhammadiyah University Press. ISBN :ISBN:9786023611287 | + |
2 | 2011 | Scientific book writing using LyX a front-end of LaTeX Waluyo Adi Siswanto Penerbit UTHM Malaysia. ISBN :ISBN:9789675457418, | + |
No | Tahun | Book | Chapter | Link |
---|---|---|---|---|
1 | 2005 | Iptek nasional pasca Habibie Waluyo Adi Siswanto, Nur Mahmudi Isma'il, Mulyanto Muhammadiyah University Press. ISBN :ISBN: 9796360535 | Kata Pengantar |
No | Jurnal | Link |
---|---|---|
1 |
Algorithm Development and Application of Spring Back Compensation for Sheet Metal Forming
AD Anggono, WA Siswanto, B Omar
Research Journal of Applied Sciences, Engineering and Technology 4 (14 … | vol: | issue : | 2012
|
+ |
2 |
Performance of Triangular and Square Ionic Lifter Systems
WA Siswanto, K Ngui
Australian Journal of Basic and Applied Sciences 5 (9), 1433-1438 | vol: | issue : | 2011
|
+ |
3 |
Die surface design optimization accommodating springback assisted by an automatic surface generator
WA Siswanto, B Omar
International Journal of Material Forming 2 (1), 797 | vol: | issue : | 2009
|
+ |
4 |
Simulation of ironing process for earring reduction in sheet metal forming
AD Anggono, WA Siswanto
Applied Mechanics and Materials 465, 91-95 | vol: | issue : | 2014
|
+ |
5 |
Teaching Finite Element Method of Structural Line Elements Assisted by Open Source FreeMat
WA Siswanto, AS Darmawan
Research Journal of Applied Sciences, Engineering and Technology 4 (10 … | vol: | issue : | 2012
|
+ |
6 |
The use of Abaqus for teaching the development of cavity defects in forward extrusion processes
TWB Riyadi, WA Siswanto
International Journal of Mechanical Engineering Education 36 (3), 221-224 | vol: | issue : | 2008
|
+ |
7 |
A platform for digital reproduction sound of traditional musical instrument Kompang
WA Siswanto, C Wahab, WM Akil, MN Yahya, AE Ismail, I Nawi
Applied Mechanics and Materials 660, 823-827 | vol: | issue : | 2014
|
+ |
8 |
Combined method of spring-forward and spring-back for die compensation acceleration
AD Anggono, WA Siswanto, B Omar
2011 Fourth International Conference on Modeling, Simulation and Applied … | vol: | issue : | 2011
|
+ |
9 |
An Alternate Method to Springback Compensation for Sheet Metal Forming
WA Siswanto, AD Anggono, B Omar, K Jusoff
The Scientific Word Journal 2014 (Article ID 301271), 13 pages | vol: | issue : | 2014
|
+ |
10 |
A Platform for Digital Reproduction Sound of Traditional Musical Instrument Kompang.
WA Siswanto, WMA CheWahab, MN Yahya, AE Ismai, I Nawi
Applied Mechanics & Materials | vol: | issue : | 2014
|
+ |
11 |
Dynamic explicit finite element code for U-bending simulation and springback prediction
AD Anggono, TWB Riyadi, WA Siswanto
Applied Mechanics and Materials 660, 337-341 | vol: | issue : | 2014
|
+ |
12 |
Numerical study of 2024 T3 aluminum plates subjected to impact and perforation
MN Ibrahim, WA Siswanto, AMA Zaidi
Journal of Mechanical Science and Technology 28 (11), 4475-4482 | vol: | issue : | 2014
|
+ |
13 |
Dynamic Explicit Finite Element Code for U-Bending Simulation and Springback Prediction.
AD Anggono, B Riyadi, T Widodo, WA Siswanto
Applied Mechanics & Materials | vol: | issue : | 2014
|
+ |
14 |
Sound Characteristics and Sound Prediction of the Traditional Musical Instrument the Three-Rattle Angklung
WA Siswanto, L Tam, MZ Kasron
J. Acoust. Vib 17 (3), 120 | vol: | issue : | 2012
|
+ |
15 |
Comparison of Commercially Pure Titanium Surface Hardness Improvement by Plasma Nitrocarburizing and Ion Implantation
AS Darmawan, WA Siswanto, T Sujitno
Advanced Materials Research 789, 347-351 | vol: | issue : | 2013
|
+ |
16 |
Surface Modification of Commercially Pure Titanium by Plasma Nitrocarburizing at Different Temperatures and Duration Process
AS Darmawan, WA Siswanto, T Sujitno
Research Journal of Applied Sciences 5 (4), 1351-1357 | vol: | issue : | 2013
|
+ |
17 |
The Influence of Plasma Nitrocarburizing Process Temperature to Commercially Pure Titanium Surface Hardness
AS Darmawan, WA Siswanto, T Sujitno
Applied Mechanics and Materials 315, 700-704 | vol: | issue : | 2013
|
+ |
18 |
Finite Element Simulation for Springback Prediction Compensation
AD Anggono, WA Siswanto, B Omar
International Journal on Advanced Science, Engineering and Information … | vol: | issue : | 2011
|
+ |
19 |
Prediction of residual stress using explicit finite element method
WA Siswanto, M Nagentrau, M Tobi, A Latif
Journal of Mechanical Engineering and Sciences (JMES) 9 (Dec), 1556-1570 | vol: | issue : | 2015
|
+ |
20 |
Shaker Table Design for Electronic Device Vibration Test System
WA Siswanto, MN Ibrahim, MA Madlan, SM Mohamad
International Journal of Engineering and Technology 3 (6), 664-668 | vol: | issue : | 2011
|
+ |
21 |
Axial Impact Performance of Aluminium Thin Cylindrical Tube
P Paruka, WA Siswanto
Applied Mechanics and Materials 315 (April), 1-5 | vol: | issue : | 2013
|
+ |
22 |
Strength analysis of human skull on high speed impact
WA Siswanto, CS Hua
International Review of Mechanical Engineering (I.RE.M.E.) 6 (7), 1508-1514 | vol: | issue : | 2012
|
+ |
23 |
Numerical Study on Failure Process of AL2024 T3 Plate under Normal Impact by Ogival Projectiles
MN Ibrahim, WA Siswanto, AMA Zaidi
International Journal of Mining, Metallurgy & Mechanical Engineering (IJMMME … | vol: | issue : | 2014
|
+ |
24 |
Computational issues in the simulation of high speed ballistic impact: A review
MN Ibrahim, WA Siswanto, AMA Zaidi
Applied Mechanics and Materials 315, 762-767 | vol: | issue : | 2013
|
+ |
25 |
Crashworthy capacity of a hybridized epoxy-glass fiber aluminum columnar tube using repeated axial resistive force
P Paruka, WA Siswanto, MA Maleque, MKM Shah
Journal of Mechanical Science and Technology 29 (5), 1941-1953 | vol: | issue : | 2015
|
+ |
26 |
Preliminary Design on Screw Press Model of Palm Oil Extraction Machine
M Firdaus, SM Salleh, I Nawi, Z Ngali, WA Siswanto, EM Yusup
IOP Conference Series: Materials Science and Engineering 165 (1), 012029 | vol: | issue : | 2017
|
+ |
27 |
Prediction of plastic deformation under contact condition by quasi-static and dynamic simulations using explicit finite element analysis
WA Siswanto, M Nagentrau, ALM Tobi, MN Tamin
Journal of Mechanical Science and Technology 30 (11), 5093-5101 | vol: | issue : | 2016
|
+ |
28 |
Finite Element Simulation of Deep Drawing of Steel-Aluminium Tailor-Welded Blanks
AD Anggono, WA Siswanto
Universitas Muhammadiyah Surakarta | vol: | issue : | 2014
|
+ |
29 |
Springback Behavior Prediction of Benchmark Problem II Numisheet 2008 Model Under Smooth Drawbead
WA Siswanto, B Omar, AD Anggono, AA Mathew
Proceeding of the NAMME2010, 197-203 | vol: | issue : | 2010
|
+ |
30 |
A Study of Auto Pour in Sand Casting Process
I Nawi, WA Siswanto, AE Ismail
Applied Mechanics and Materials 660, 74-78 | vol: | issue : | 2014
|
+ |
31 |
Contact Pressure Prediction Comparison Using Implicit and Explicit Finite Element Methods and the Validation with Hertzian Theory
WA Siswanto, N Muniandy, ALM Tobi, MN Tamin
International Journal of Mechanical & Mechatronics Engineering 15 (6), 1-8 | vol: | issue : | 2015
|
+ |
32 |
AN Improved DTC of an induction motor drive with neural network controller
WM Utomo, SY Sim, ZA Haron, AA Boharia, N Muhammad Zin, R Mat Ariff, ...
International Journal of Mechanical & Mechatronics Engineering 14 (2), 54-59 | vol: | issue : | 2014
|
+ |
33 |
Sound Characteristics and Sound Prediction of the Traditional Musical Instrument the Three-Rattle Angklung.
WA Siswanto, L Tarn, MZ Kasron
International Journal of Acoustics & Vibration 17 (3) | vol: | issue : | 2012
|
+ |
34 |
Fatigue vibration monitoring of dissimilar joints
WA Siswanto, JJ Ramakrishna
| vol: | issue : | 2009
|
+ |
35 |
Investigation on the effect of linear kinematic hardening model on plasticity prediction of reciprocating sliding contact
M Nagentrau, WA Siswanto, M Tobi, A Latif
Applied Mechanics and Materials 773, 183-187 | vol: | issue : | 2015
|
+ |
36 |
Numerical study on failure process of aluminium plate subjected to normal impact by hemispherical projectiles
MN Ibrahim, WA Siswanto, AMA Zaidi
Applied Mechanics and Materials 660, 598-602 | vol: | issue : | 2014
|
+ |
37 |
Effect of Femoral Head Size to Contact Stress at Pure Titanium Femoral Ball Head Outer Surface of Hip Joint Implant
AS Darmawan, WA Siswanto, H Samekto
Proceeding of National Conference on Advanced Manufacturing and Materials�… | vol: | issue : | 2010
|
+ |
38 |
Review on Anthropometric Test Dummy and Computational Modelling
L Tam, B Omar, WA Siswanto
Applied Mechanics and Materials 315, 640-644 | vol: | issue : | 2013
|
+ |
39 |
Structural behavior of a ballasted small railway track under static and dynamic loadings
WA Siswanto, ST Yun, WM Utomo
International Review on Modelling and Simulation 7 (1), 59-64 | vol: | issue : | 2014
|
+ |
40 |
General Purpose Vibration Test System for Electronic Devices
WA Siswanto, MN Ibrahim, MA Madlan, SM Mohamad
MUCEET2010 | vol: | issue : | 2010
|
+ |
41 |
Mechanical properties of CaCO3 extracted from cockle shell with high density polyehylene (HDPE) for biomaterials in bone substitute application
E Yusup, AR Roslan, WA Siswanto, MZ Ngali, S Salleh, Z Mohamad, ...
Science International 30 (1), 91-95 | vol: | issue : | 2018
|
+ |
42 |
Hybrid Die Compensation Method to Accommodate Springback Error in Sheet Metal
AD Anggono, WA Siswanto, B Omar
AIP Conference Proceedings 1383 (1), 1056-1063 | vol: | issue : | 2011
|
+ |
43 |
Predicting the sliding amplitude of plastic deformation in the reciprocating sliding contact
M Nagentrau, WA Siswanto, M Tobi, A Latif
ARPN Journal of Engineering and Applied Sciences 11 (4), 2266-2271 | vol: | issue : | 2016
|
+ |
44 |
Finite element analysis of stress intensity factor of pre-cracked coated substrate under contact sliding
ML Mohsin, ALM Tobi, WA Siswanto, MN Tamin
36th International Electronics Manufacturing Technology Conference, 1-4 | vol: | issue : | 2014
|
+ |
45 |
The influence of linear kinematic hardening and non-linear combined isotropic-kinematic hardening plasticity model on sliding contact
M Nagentrau, WA Siswanto, M Tobi, A Latif
International Journal of Mechanical & Mechatronics Engineering 16 (4), 83-88 | vol: | issue : | 2016
|
+ |
46 |
Numerical Tension Adjustment of X-Ray Membrane to Represent Goat Skin Kompang
M Syiddiq, WA Siswanto
IOP Conference Series: Materials Science and Engineering 165 (1), 012024 | vol: | issue : | 2017
|
+ |
47 |
Biomechanics Analysis of Combat Sport (Silat) By Using Motion Capture System
MZ Kaharuddin, SBK Razak, MI Kushairi, MSA Rahman, WC An, Z Ngali, ...
IOP Conference Series: Materials Science and Engineering 165 (1), 012028 | vol: | issue : | 2017
|
+ |
48 |
Microstructural and Physical Characteristics of Recycling Aluminium Chips AA6061/Al Powder Using Powder Metallurgy
MI Ab Kadir, MS Mustapa, WA Siswanto, AS Mahdi, MA Samsi
International Journal of Engineering and Technology 8 (6), 2619-2625 | vol: | issue : | 2017
|
+ |
49 |
Tooling Design Optimisation for Multistage Sheet Metal Forming
WA Siswanto
Royal Melbourne Institute of Technology | vol: | issue : | 2000
|
+ |
50 |
Highly Active W-H2SO4/HZSM-5 Catalyst for Direct Conversion of Methane into Aromatic
K Kusmiyati, NAS Amin, WA Siswanto
Bulletin of Chemical Reaction Engineering and Catalysis 2 (2-3), 32-36 | vol: | issue : | 2007
|
+ |
51 |
Numerical Investigation of Hollow Metal Cross Section Profiles on Impact
WA Siswanto, B Omar, S Shukri
Advanced Materials Research 383, 3241-3248 | vol: | issue : | 2012
|
+ |
52 |
High speed impact characteristics of plastic material based on finite element simulation
WA Siswanto, RY Sharafuddin, P Paruka
Advanced Materials Research 383, 3229-3233 | vol: | issue : | 2012
|
+ |
53 |
High-G drop effect on the creep-fatigue failure of SAC solder joints in BGA packages
A Surendar, WA Siswanto, M Alijani, K Alhaifi, M Salmani
Microsystem Technologies, 1-8 | vol: | issue : | 2019
|
+ |
54 |
Demonstration of Comparison between Goat Skin and X-Ray Film Membranes on Traditional Musical Instrument Kompang
WA Siswanto, M Syiddiq
Pertanika Journal of Science & Technology (JST) 26 (2), 585 - 598 | vol: | issue : | 2018
|
+ |
55 |
Effect of amorphous silica by rice husk ash on physical properties and microstructures of recycled aluminium chip AA7075
NF Mohd Joharudin, N Abdul Latif, MS Mustapa, MN Mansor, ...
Materialwissenschaft und Werkstofftechnik 50 (3), 283-288 | vol: | issue : | 2019
|
+ |
56 |
vorheriger Artikel 3D-printed membrane microvalves and microdecoder
A Surendar, WA Siswanto, M Alijani, K Alhaifi, M Salmani
| vol: | issue : | 0000
|
+ |
57 |
Computational Modelling and Movement Analysis of Hip Joint with Muscles
WA Siswanto, CC Yoon, SM Salleh, MZ Ngali, EM Yusup
IOP Conference Series: Materials Science and Engineering 165 (1), 012030 | vol: | issue : | 2017
|
+ |
58 |
Dynamic Simulation and Analysis of Human Walking Mechanism
A Azahari, WA Siswanto, MZ Ngali, SM Salleh, EM Yusup
IOP Conference Series: Materials Science and Engineering 165 (1), 012027 | vol: | issue : | 2017
|
+ |
59 |
Case study: techniques for material characterisation of brass tensile testing fracture sample
M Tobi, A Latif, I Zaman, MS Mustapa, WA Siswanto, S Mahzan
ARPN Journal of Engineering and Applied Sciences 11 (16), 10128-10132 | vol: | issue : | 2016
|
+ |
60 |
Single-camera motion capture system for netball team strategic tool
MZ Ngali, NSS Ibrahim, S Md Salleh, WA Siswanto
ARPN Journal of Engineering and Applied Sciences 11 (14), 8653-8657 | vol: | issue : | 2016
|
+ |
61 |
Temperature decrement rate of bath tub water for ice bath therapy
MF Husaini, S Md Salleh, MZ Ngali, WA Siswanto
ARPN Journal of Engineering and Applied Sciences 11 (12), 7480-7484 | vol: | issue : | 2016
|
+ |
62 |
Analyses of various viscosity effects to hydrodynamic lubrication in tube spinning process
I Nawi, BAM Zain, WA Siswanto, N Jaffery, H Wahab
Proceedings of Malaysian International Tribology Conference 2015, 181-182 | vol: | issue : | 2015
|
+ |
63 |
Inlet-outlet arrangement effects on ice bath cooling system for athlete's injury recovery procedure
MZ Ngali, S Abdul Razak, NA Daud, S Md Salleh, WA Siswanto
| vol: | issue : | 2015
|
+ |
64 |
Analysis of Sound Produced by a Traditional Malay Musical Instrument “Kompang”
AE Ismail, KA Arif, MN Yahya, WA Siswanto, I Nawi
Applied Mechanics and Materials 773, 53-57 | vol: | issue : | 2015
|
+ |
65 |
Investigation on the effect of sliding on plasticity prediction of reciprocating sliding contact with linear kinematic hardening model
M Nagentrau, WA Siswanto, M Tobi, A Latif
| vol: | issue : | 2014
|
+ |
66 |
Investigation on the Stress Behaviour of Coating-Substrate Interface under Contact Loading
M Rani, AL Tobi, AE Ismail, WA Siswanto, AA Saad
Applied Mechanics and Materials 465, 1319-1323 | vol: | issue : | 2014
|
+ |
67 |
Stress Concentration Analysis of Plate with Circular Hole: Elasticity Theory and Finite Element Comparison
SR Masrol, WA Siswanto
Applied Mechanics and Materials 465, 1385-1389 | vol: | issue : | 2014
|
+ |
68 |
INVESTIGATION NOVEL MATCHED VALVE-ACTUATOR ATOMIZER INSERT DESIGN FOR LIQUID (The 16th Conference of ILASS-Asia)
N Asmuin, A Ismail, WA Siswanto
微粒化シンポジウム講演論文集 22, 191-195 | vol: | issue : | 2013
|
+ |
69 |
Springback Prediction Compensation and Optimization for Front Side Member in Sheet Metal Forming Using FEM Simulation
AD Anggono, WA Siswanto, B Omar
Advanced Materials Research 789, 436-442 | vol: | issue : | 2013
|
+ |
70 |
The Influences of Ion Implantation Doses to Commercially Pure Titanium Surface Hardness
AS Darmawan, WA Siswanto, BW Febrianto, T Sujitno
Simposium Nasional RAPI XI, 1412-9612 | vol: | issue : | 2012
|
+ |
71 |
Computational Kinematics Sensitivity Analysis of Eccentric Reciprocating Slider Mechanism
WA Siswanto, MN Ibrahim
International Journal of Mathematical Models and Methods in Applied Sciences … | vol: | issue : | 2012
|
+ |
72 |
Development of a robust method to accomodate springback distortion in multistage sheet metal forming
B Omar, WA Siswanto, AD Anggono
Ministry of Higher Education Malaysia | vol: | issue : | 2011
|
+ |
73 |
Scientific book writing using LYX a front-end of latex
WA Siswanto
Penerbit UTHM | vol: | issue : | 2011
|
+ |
74 |
Pengembangan Desain Rakitan Produk Dengan Metode Knowledgeware Melalui Pengubahan Parameter Desain
HTD Sejati, WA Siswanto, P Partono
Poros 7 (2) | vol: | issue : | 2010
|
+ |
75 |
Racang Bangun Digital Signal Analyzer DSA-01 Untuk Analisis Pemodelan Sistem Getaran
M Effendy, W Siswanto, PB Santoso
Poros 8 (1) | vol: | issue : | 2010
|
+ |
76 |
Principles of engineering dynamics: concise theory and applications
WA Siswanto
Penerbit UTHM | vol: | issue : | 2008
|
+ |
77 |
Simulasi Springback Bechmark Problem Cross Member NUMISHEET 2005
AA Wahyudi, TWBR Waluyo Adi Siswanto
Media Mesin 7 (1), 24-31 | vol: | issue : | 2006
|
+ |
78 |
SCIENTIFIC EDITORS
NHM Nor, A Khalid, MR Ibrahim, MFM Batcha, AMT Arifin, I Zaman, ...
| vol: | issue : | 0000
|
+ |
79 |
MECHANICAL PROPERTIES OF CaCO3 EXTRACTED FROM COCKLE SHELL WITH HIGH DENSITY POLYETHYLENE (HDPE) FOR BIOMATERIALS IN BONE SU...
E Yusup, AR Roslan, WA Siswanto, MZ Ngali, S Salleh, Z Mohamad, ...
| vol: | issue : | 0000
|
+ |
80 |
Elastoplastic Analysis of Plate With Boundary Element Method
Supriyono, Wijianto, M Effendy, WA Siswanto
International Journal of Mechanical Engineering and Technology (IJMET) 9 (6 … | vol: | issue : | 2018
|
+ |
81 |
Sail Position and Notch-Tail Modification to Reduce the Drag of a Mini Submarine
Sarjito, A Wijayanto, WA Siswanto
International Journal of Mechanical Engineering and Technology (IJMET) 9 (6 … | vol: | issue : | 2018
|
+ |
82 |
Effect of Humidity on the Membrane Vibration of Musical Instrument Kompang
WA Siswanto, MS Abdullah, AS Darmawan
International Journal of Mechanical Engineering and Technology (IJMET) 9 (6�… | vol: | issue : | 2018
|
+ |
83 |
Selecting nozzle arrangement of a chimney tower to reduce the temperature and to increase the entrainment mass flow
S Sarjito, WA Siswanto, J Agus, Y Yufeng
International Journal of Mechanical and Production Engineering Research and�… | vol: | issue : | 2018
|
+ |
84 |
Teori dan Aplikasi Dinamika Teknik: dengan Contoh dalam SMath
WA Siswanto
Muhammadiyah University Press | vol: | issue : | 2018
|
+ |
85 |
Selected Peer-Reviewed Articles from the International Conference on Engineering Application, Physics and Sciences (ICEAPS2017), Johor Bahru, Malaysia, 26–27 October, 2017
WA Siswanto, AS Darmawan, WM Utomo, H Supriyono, W Setiawan, ...
Advanced Science Letters 24 (12), 9023-9025 | vol: | issue : | 2018
|
+ |
86 |
Performance Evaluation of Impact Simulation on Cluster Computing
MN Ibrahim, WA Siswanto, AMA Zaidi, B Handaga
Advanced Science Letters 24 (12), 9063-9066 | vol: | issue : | 2018
|
+ |
87 |
Experimental Evaluation of Fish Feeder Machine Controller System
AHM Yusoff, SM Salleh, ME Abdullah, I Zaman, MHM Hani, WA Siswanto, ...
International Journal of Integrated Engineering 10 (8) | vol: | issue : | 2018
|
+ |
88 |
SIMULASI THERMAL TRANSIENT KACA LEMBARAN TERPAPAR TEMPERATUR RADIASI DENGAN ANALISA THERMAL STRESS
E Julianto, WA Siswanto
Media Mesin: Majalah Teknik Mesin 20 (1), 28-35 | vol: | issue : | 2019
|
+ |
89 |
KINEMATICS OF MECHANISMS
WA Siswanto
| vol: | issue : | 0000
|
+ |
90 |
Effect of Heat Treatment on Tensile Strength of Direct Recycled Aluminium Alloy (AA6061)
MH Rady, AS Mahdi, MS Mustapa, S Shamsudin, MA Lajis, MS Msebawi, ...
Materials Science Forum 961, 81 | vol: | issue : | 2019
|
+ |
91 |
Predicting Surface Hardness of Commercially Pure Titanium under Ion Implantation Process
AS Darmawan, WA Siswanto, BW Febriantoko, A Hamid, T Sujitno
Materials Science Forum 961, 97-106 | vol: | issue : | 2019
|
+ |
92 |
Effect of Increasing Salinity to Corrosion Resistance of 5052 Aluminum Alloy in Artificial Seawater
AS Darmawan, WA Siswanto, PI Purboputro, AD Anggono, A Hamid
Materials Science Forum 961, 107-111 | vol: | issue : | 2019
|
+ |
93 |
Mechanical & Manufacturing Engineering
AJ Alimin, ALM Tobi, A Khalid, HZ Abdullah, I Masood, MHI Ibrahim, ...
Trans Tech Publications Ltd | vol: | issue : | 2013
|
+ |
94 |
Materials, Mechanical and Manufacturing Engineering
YH Kim, P Yarlagadda
Trans Tech Publications Ltd | vol: | issue : | 2013
|
+ |
No | Tahun | Seminar | Link |
---|---|---|---|
1 | 2019 | 'EFFECT OF HUMIDITY ON THE VIBRATION OF MUSICAL INSTRUMENT KOMPANG' Asian Conference on Industrial Technology and Integrated Engineering (ACITIE2017) - PTM Jatim collaboration with UCMM, Surabaya , Indonesia Ir. Waluyo Adi Siswanto, M.Eng., Ph.D isbn : None | |
2 | 2019 | 'Impact analysis and modification of front inner bumper' The Mechanical Engineering, Science and Technology (MEST2018) - Reezqi Academy, Selangor , Malaysia Ir. Waluyo Adi Siswanto, M.Eng., Ph.D isbn : None |
No | Judul | Peran | Tahun | Sumber Dana |
---|---|---|---|---|
1 | [FRGS 1543] A New Algorithm Formulation And Biomechanics Motion Analysis Setup For Malaysia's High Performance Athletes In Individual And Team Sports | Anggota Peneliti | 2015 - 2018 | International (Malaysia) |
2 | [FRGS 1547] Correction On The Conventional Constitutive Formulation To Predict Three Dimensional Stress-state Of Deformation Behaviour In Commercial Aluminum Alloys Undergoing High Velocity Impacts | Anggota Peneliti | 2015 - 2018 | International (Malaysia) |
3 | [GIPS 809] Surface hardening modelling and contact algorithm improvement for high performance finite element method in parallel computing | Peneliti Utama | 2015 - 2016 | International (Malaysia) |
4 | [GIPS U398] FE analysis of fracture and delamination on coated subtrated | Anggota Peneliti | 2015 - 2016 | International (Malaysia) |
5 | [GIPS U292] Developing A Numerical Model for X-Ray Kompang | Peneliti Utama | 2015 - 2016 | International (Malaysia) |
6 | [UTHM Short Grant U119] Development of autofeeder with pneumatic control systems to produce high glossy acrylic door panel at Taichi Tech Industry Sdn Bhd | Anggota Peneliti | 2014 - 2016 | International (Malaysia) |
7 | [FRGS 1420] A new algorithm framework of granular fertiliser boom sprayer simulation for paddy field simulation | Anggota Peneliti | 2013 - 2015 | International (Malaysia) |
8 | [RACE 1441] Characterisation of failure mechanism of a coated surface using finite element simulation method for a novel coating selection tool | Anggota Peneliti | 2013 - 2015 | International (Malaysia) |
9 | [FRGS 1424] Investigation of kenaf fiber reinforced composites for automotive crash energy absorbing structures | Anggota Peneliti | 2013 - 2015 | International (Malaysia) |
10 | [FRGS 1206] Sound Characterisation of Traditional Musical Instrument Kompang to Reproduce Digital Synthesizer | Peneliti Utama | 2013 - 2015 | International (Malaysia) |
11 | [RAGS R010] Modelling of elastoplastic damage constitutive model for plastic dynamic behavior in automotive and aerospace structures | Anggota Peneliti | 2012 - 2014 | International (Malaysia) |
12 | [RAGS R011] Evaluation of novel plasticity type wear model for living prediction in aeroengine components | Anggota Peneliti | 2012 - 2014 | International (Malaysia) |
13 | [FRGS 748] A new framework of hybrid springback compensation algorithm for high precision stamping part | Peneliti Utama | 2010 - 2012 | International (Malaysia) |
14 | [ScienceFund S015] New Design Of Pure Titanium Metal On Metal Total Hip Replacement With Ion Implanted Wear Resistance Surface | Peneliti Utama | 2008 - 2010 | International (Malaysia) |
15 | [FRGS 557] Development of robust method to accommodate springback distortion in in multistage sheet metal forming | Anggota Peneliti | 2008 - 2010 | International (Malaysia) |
16 | [UTHM Short Grant 506] Influence of draw beads on the springback behavior of the benchmark problem NUMISHEET 2008 | Peneliti Utama | 2008 - 2009 | International (Malaysia) |
No Data Pengabdian.
No | Peran | Judul | Mahasiswa | Tahun Mulai |
---|---|---|---|---|
1 | Pembimbing Satu | Surface Treatment Numerical FEM Modelling for Biomechanics Application | Agung Setyo Darmawan | 2019 |
No | Peran | Judul | Mahasiswa | Tahun Mulai |
---|---|---|---|---|
1 | Pembimbing Dua | Fretting investigation on metalsurface | Mohamad Lokman bin Mohsin (HD130014) | 2017 |
2 | Pembimbing Satu | Nonlinear simulation development for blasting and impact application | Mohd Norihan bin Ibrahim @ Tamrin | 2017 |
3 | Pembimbing Satu | DYNAMIC SIMULATION AND ANALYSIS OF HUMAN WALKING MECHANISM | ATHIRAH BINTI AZAHARI (CD130195) | 2017 |
4 | Pembimbing Satu | VERIFICATION AND COMPARISON OF IMPACT BONE CASE STUDY IN IMPACT AND FEBIO | AHMAD KHAIRUL KHAIR BIN MOHD YUSRI (CD130194) | 2017 |
5 | Pembimbing Satu | Developing Numerical Model for x-ray Kompang | Muhammad Syiddiq Bin Abdullah (GD140113) | 2017 |
6 | Pembimbing Satu | Plastic deformation prediction on coated substrate using explicit finite element method for novel coating selection tool | Nagentrau A/L Muniandy (GD140086) | 2017 |
7 | Pembimbing Satu | Investigation of human bone material properties to the bone crack behaviour on impact by using finite element analysis | Mohamad Akmal Bin Jamil (AD120136) | 2016 |
8 | Pembimbing Satu | Development of computer interface simulation platform for bone injury analysis | Wan Muhamad Asyraf Bin Wan Mohd Bakri (AD120150) | 2016 |
9 | Pembimbing Satu | FINITE ELEMENT METHOD MODEL OF HUMAN FOOT FOR BIOMECHANICS RESEARCH | Muhammad Azhar Bin Mohd Hanas (CD120038) | 2016 |
10 | Pembimbing Satu | Simulation of B-pillar in sheet metal forming with different blank materials | Muhammad Dinie Al-Syafiq Bin Radzuan (CD110235) | 2015 |
11 | Pembimbing Satu | Finite element analysis of axisymmetric shell structure | Soh Kai Ying | 2015 |
12 | Pembimbing Dua | Development Model of Finite Element Model for Malaysian Female Anthropometric Dummy | Lina Tam (HD110119) | 2015 |
13 | Pembimbing Satu | Finite element fixation model of human knee bone with tendon | Ahmad Fuad Bin Mat Yusoff (AD120031) | 2015 |
14 | Pembimbing Satu | Digital reproduction sound of kompang by using digital midi synthesizer | Wan Muhamed Akil Bin Che Wahab (CD110378) | 2015 |
15 | Pembimbing Satu | Combined Method for Die Compensation in Sheet Metal Forming | Agus Dwi Anggono (HD090048) | 2014 |
16 | Pembimbing Satu | Boron steel tensile test simulation under preheated environment | Nurul Najwa Binti Ahmad (CD11034) | 2014 |
17 | Pembimbing Satu | Reproduction off Kompang Sound Using Frequency Data | Abdul Halim Bin Rasul (Ad100056) | 2014 |
18 | Pembimbing Satu | Performance Analysis of Barbell Bench Press Equipment With Different Angles for Chest Workout | Muhd Hakeem Bin Ahmad Tajudin (Ad100069) | 2014 |
19 | Pembimbing Satu | Finite Element Analysis of General Three Dimensional Space Frame | Hairul Mubarak Bin Hassim (GD110173) | 2013 |
20 | Pembimbing Satu | Sound Characteristics Assessment Of The Acoustic Guitar String | Jearron Jackson Akat (DD090106) | 2013 |
21 | Pembimbing Satu | Simulation of B-pillar standard benchmark for hot forming sheet metal | Dayanathan A/L Balakrishnan (CD100066) | 2013 |
22 | Pembimbing Satu | DEVELOPMENT OF IMPACT TESTING MACHINE AND SIMULATION | PEROWANSA PARUKA | 2012 |
23 | Pembimbing Satu | MODELING AND SAFETY ANALYSIS OF MALAYSIAN RAILWAY TRACK | Sham Tsae Yun | 2012 |
24 | Pembimbing Satu | IMPACT ANAYLSIS AND MODIFICATION OF FRONT INNER BUMPER FOR SEDAN | Tan Kang Teng | 2012 |
25 | Pembimbing Satu | Noise Cancellation of Frequencies Produced by Band-saw Metal Cutting Machine | AbdulHafedh Abdulrab Sharaf Al-Ahdal | 2012 |
26 | Pembimbing Satu | INVESTIGATION OF TWO CARS HEAD ON COLLISION | TAN CHUN HAW | 2012 |
27 | Pembimbing Satu | INVESTIGATION OR REAR END CRASH ON MALAYSIAN CAR | TUNG HENG GIAP | 2012 |
28 | Pembimbing Satu | Sound Characteristics of Traditional Musical Instrument Kompang | Ling How Hua | 2012 |
29 | Pembimbing Satu | Development of GiD to FEBio Interface for biomechanics analysis | Christopher Gabriel Swyny | 2012 |
30 | Pembimbing Satu | Sound Characteristics of Kompang with X-Ray Film Membrane | Khamarul Ashraaf Bin Arif | 2012 |
31 | Pembimbing Satu | MODELLING AND SAFETY ANALYSIS OF MALAYSIAN RAILWAY TRACK | CHONG SZU HUA | 2011 |
32 | Pembimbing Satu | Investigation of the Metal Cross Section Profiles of Front Bumper Attachment | Shamsir Bin Shukri | 2010 |
33 | Pembimbing Satu | Development of Natural Frequency Platform by Using Finite Element Method | Chin Yoong Woon | 2010 |
34 | Pembimbing Satu | Development of Stress Analysis Program for Tensile Test of Plate With Hole | Chan Choon Kit | 2010 |
35 | Pembimbing Satu | High Speed Impact Characteristics of Plastics | Rodzilla Yahya Sharafuddin | 2010 |
36 | Pembimbing Satu | COMPUTATIONAL MODELING OF HIP JOINT WITH MUDCLES | CHIN CHAI YOON | 2010 |
37 | Pembimbing Satu | DEVELOPMENT OF MALAYSIAN FEMALE ADULT 50TH PERCENTILE CRASH DUMMY MODEL | SITI HAMIDAH BINTI MOHAMAD HAIRI | 2010 |
38 | Pembimbing Satu | Dynamics response of car passenger on frontal collision | Amiruddin Faizal Bin Nekmat | 2009 |
39 | Pembimbing Satu | Experimental Investigation of Drawbeads Geometry to Minimise Springback in Drawing Processes | Nik Aida Madiha bt N Zainal Abidin | 2009 |
40 | Pembimbing Satu | Improvement of a Portable Water Filter Shell to a New Stronger Design Based on Impact Criterion | Nurul Zieyana bt Mohamed Anuar | 2009 |
41 | Pembimbing Satu | Development of Mini Sled Impact Test System | Shahrul Effendy Bin Md Yazit | 2009 |
42 | Pembimbing Satu | Vibration Test System For Electronic Devices | Siti Mariah Binti Mohamad | 2009 |
43 | Pembimbing Satu | Development of Computational Motorcycle and Rider to Investigate Crash Behaviors on Collision | Nur Hasalli Binti Hj Ibrahim | 2009 |
44 | Pembimbing Satu | Experimental Safety Investigation of Children Helmet on a Mini Sled Test | Dayang Nurul Hafizawaty Bt Abang Ali | 2009 |
45 | Pembimbing Satu | Numerical Simulation on Children Helmet Test | Siti Khadijah Bte Mohd Borhan | 2009 |
46 | Pembimbing Satu | Crash Investigation of Cushion Barrier Using Finite Element Method | Tan Kang Yao | 2009 |
47 | Pembimbing Satu | Sound Characteristics of Traditional Musical Instrument Angklung | Lina Tam | 2009 |
48 | Pembimbing Satu | Computational Model of Cushion Barrier to Investigate the Crash Performance | Desmond Choo Wan Keong | 2009 |
49 | Pembimbing Satu | Development of mathematical model platform of suspension system of motorcycle | Kamarul Izzadi Bin Kemarudin | 2009 |
50 | Pembimbing Satu | Computational Investigation of Drawbeads Geometry to Minimise Springback in Sheet Metal Forming | Nor Assikin Bte Khamis | 2008 |
51 | Pembimbing Satu | Influence of Drawbeads on the Springback Behaviour of NUMISHEET 2008 | Annevella Anak Mathew | 2008 |
52 | Pembimbing Satu | Dynamic Analysis of Mechanical Biped Robotic System | Maryani Muchtar | 2008 |
53 | Pembimbing Satu | Fatigue Vibration Monitoring using Laser Doppler For Dissimilar Joint Material | Jeevana Jothi A/P Ramakrisna | 2008 |
No | Nama Penghargaan | Tingkat | Tahun |
---|---|---|---|
1 | Achieving 25 documents publications in SCOPUS Universiti Tun Hussein Onn Malaysia (UTHM) | internasional | 2014 |
2 | Anugerah PnP Cemerlang FKMP UTHM, Sem 1 Sesi 2013-2014 Universiti Tun Hussein Onn Malaysia (UTHM) | internasional | 2014 |
3 | Anugerah PnP Cemerlang FKMP UTHM, Sem 2 Sesi 2012-2013 Universiti Tun Hussein Onn Malaysia (UTHM) | internasional | 2014 |
4 | Anugerah Buku Terbaik Kategori Sains Teknologi dan Kejuruteraan Project leader Scientific Book Writing Using LyX a Front-end of LaTeX (Hadiah Penghargaan) Universiti Tun Hussein Onn Malaysia (UTHM) | internasional | 2012 |
5 | International Invention Innovation and Technology Exhibition (ITEX2010) Project leader Computational Model of Motorcycle and Rider (Bronze medal) | internasional | 2010 |
6 | Anugerah Perkhidmatan Cemerlang (Outstanding Staff) Universiti Tun Hussein Onn Malaysia (UTHM) | internasional | 2010 |
7 | Anugerah Buku Terbaik Kategori Sains Teknologi dan Kejuruteraan Project leader Principles of Engineering Dynamics Concise Theory and Applications (Hadiah Pertama) Universiti Tun Hussein Onn Malaysia (UTHM) | internasional | 2010 |
8 | International Invention Innovation and Technology Exhibition (ITEX2010) Project leader Graphical user interface GiD to Impact (Silver medal) | internasional | 2010 |
9 | Anugerah Buku Terlaris Kategori Sains Teknologi dan Kejuruteraan Project leader Principles of Engineering Dynamics Concise Theory and Applications (Hadiah Kedua) Universiti Tun Hussein Onn Malaysia (UTHM) | internasional | 2010 |
No | Nama Matakuliah | Semester | Tahun | Deskripsi |
---|---|---|---|---|
1 | Advanced Mechanisms and Machines (MDM10704) | semester 2 | 2019 | Universiti Tun Hussein Onn Malaysia (UTHM) Master |
2 | Kinematics Mechanism (BDC40303) | semester 2 | 2019 | Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor |
3 | Dasar Pemgrograman Komputer (MEN40932) | semester 2 | 2018 | Universitas Muhammadiyah Surakarta (UMS) Bachelor |
4 | Finite Element Methods (MEN70843) | semester 2 | 2018 | Universitas Muhammadiyah Surakarta (UMS) Bachelor |
5 | Dasar Pemgrograman Komputer (TME2123) | semester 2 | 2018 | Bachelor |
6 | Numerical Methods (MEN40334) | semester 2 | 2018 | Universitas Muhammadiyah Surakarta (UMS) Bachelor |
7 | Engineering Mathematics 4 (BDA34003) | semester 2 | 2016 | Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor |
8 | Kinematics Mechanism (BDC40303) | semester 1 | 2016 | Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor |
9 | Engineering Mathematics 4 (BDA34003) | semester 1 | 2016 | Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor |
10 | Finite Element Methods (BDA31003) | semester 1 | 2016 | Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor |
11 | Advanced Engineering Mathematics (MDC10103) | semester 2 | 2016 | Universiti Tun Hussein Onn Malaysia (UTHM) Master |
12 | Advanced Engineering Mathematics (MDC10103) | semester 2 | 2016 | Universiti Tun Hussein Onn Malaysia (UTHM) Master |
13 | Kinematics Mechanism (BDC40303) | semester 2 | 2016 | Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor |
14 | Finite Element Methods (BDA31003) | semester 2 | 2016 | Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor |
15 | Universiti Tun Hussein Onn Malaysia (UTHM) Master | semester 2 | 2015 | Advanced Engineering Mathematics (MDC10103) |
16 | Kinematics Mechanism (BDC40303) | semester 1 | 2015 | Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor |
17 | Finite Element Methods (BDA31003) | semester 1 | 2015 | Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor |
18 | Kinematics Mechanism (BDC40303) | semester 1 | 2015 | Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor |
19 | Engineering Mathematics 4 (BDA34003) | semester 3 | 2015 | Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor |
20 | Engineering Mathematics 4 (BDA34003) | semester 3 | 2015 | Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor |
21 | Universiti Tun Hussein Onn Malaysia (UTHM) Bachelo | semester 2 | 2015 | Finite Element Methods (BDA31003) |
22 | Engineering Mathematics 4 (BDA34003) | semester 1 | 2015 | Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor |
23 | Engineering Mathematics 4 (BDA34003) | semester 2 | 2014 | Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor |
24 | Finite Element Methods (BDA40303) | semester 1 | 2014 | Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor |
25 | Advanced Mechanisms and Machines (MDM10704) | semester 2 | 2014 | Universiti Tun Hussein Onn Malaysia (UTHM) Master |
26 | Kinematics Mechanism (BDC40303) | semester 2 | 2014 | Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor |
27 | Kinematics Mechanism (BDC40303) | semester 1 | 2014 | Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor |
28 | Engineering Mathematics 4 (BWM30603) | semester 2 | 2013 | Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor |
29 | Advanced Engineering Mathematics (MDC10103) | semester 1 | 2013 | Universiti Tun Hussein Onn Malaysia (UTHM) Master |
30 | Kinematics Mechanism (BDC4043) | semester 2 | 2013 | Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor |
31 | Product Lifecycle Management (MDM10904) | semester 2 | 2013 | Universiti Tun Hussein Onn Malaysia (UTHM) Master |
32 | Modelling and Simulation (MDC10203) | semester 1 | 2012 | Universiti Tun Hussein Onn Malaysia (UTHM) Master |
33 | Finite Element Methods (BDA4033) | semester 1 | 2012 | Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor |
34 | Universiti Tun Hussein Onn Malaysia (UTHM) Bachelo | semester 1 | 2012 | Engineering Mathematics 4 (BWM30603) |
35 | Solid Mechanics 2 (BDA30303) | semester 1 | 2011 | Universiti Tun Hussein Onn Malaysia (UTHM) Master |
36 | Elasticity (MDM10203) | semester 1 | 2011 | Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor |
37 | Dynamics (BDA20103) | semester 2 | 2011 | Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor |
38 | Mechanics of Machines (BDA20303) | semester 2 | 2011 | Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor |
39 | Modelling and Simulation (MKM1803) | semester 1 | 2011 | Universiti Tun Hussein Onn Malaysia (UTHM) Master |
40 | Solid Mechanics 1 (BDA10402) | semester 1 | 2011 | Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor |
41 | Modelling and Simulation (MDC10203) | semester 2 | 2010 | Universiti Tun Hussein Onn Malaysia (UTHM) Master |
42 | Finite Element Methods (BDA4033) | semester 1 | 2010 | Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor |
43 | Dynamics (BDA20103) | semester 2 | 2010 | Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor |
44 | Finite Element Methods (BDA4033) | semester 3 | 2010 | Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor |
45 | Dynamics (BDA2013) | semester 1 | 2010 | Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor |
46 | Finite Element Methods (BDA4033) | semester 1 | 2010 | Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor |
47 | Noise and Vibration (BDC4013) | semester 2 | 2009 | Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor |
48 | Mechanics of Machines (BDA2033) | semester 2 | 2009 | Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor |
49 | Noise and Vibration (BDC4013) | semester 1 | 2008 | Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor |
50 | Dynamics (BDA2013) | semester 2 | 2008 | Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor |
51 | Dynamics (BDA2013) | semester 1 | 2008 | Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor |
52 | Dynamics (BDA2013) | semester 1 | 2008 | Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor |
53 | Dynamics (BDA2013) | semester 2 | 2007 | Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor |
54 | Finite Element Methods | semester 1 | 2007 | Universitas Muhammadiyah Surakarta Bachelor |
55 | Universitas Muhammadiyah Surakarta Bachelor | semester 1 | 2007 | Aerodynamics |
56 | Operations Management | semester 1 | 2007 | Universitas Muhammadiyah Surakarta Master |
57 | Finite Element Methods | semester 2 | 2006 | Universitas Muhammadiyah Surakarta Bachelor |
58 | Aerodynamics | semester 2 | 2006 | Universitas Muhammadiyah Surakarta Bachelor |
59 | Operations Management | semester 2 | 2006 | Universitas Muhammadiyah Surakarta Master |
60 | Finite Element Methods | semester 1 | 2006 | Universitas Muhammadiyah Surakarta Bachelor |
61 | Operations Management | semester 1 | 2006 | Universitas Muhammadiyah Surakarta Master |
62 | Aerodynamics | semester 2 | 2005 | Universitas Muhammadiyah Surakarta Bachelor |
63 | Operations Management | semester 2 | 2005 | Universitas Muhammadiyah Surakarta Maste |
64 | Finite Element Methods | semester 1 | 2005 | Universitas Muhammadiyah Surakarta Bachelor |
65 | Operations Management | semester 1 | 2005 | Universitas Muhammadiyah Surakarta Master |
66 | Aerodynamics | semester 2 | 2004 | Universitas Muhammadiyah Surakarta Bachelor |
67 | Operations Management | semester 2 | 2004 | Universitas Muhammadiyah Surakarta Master |
68 | Engineering Dynamics | semester 1 | 2004 | Universitas Muhammadiyah Surakarta Bachelor |
69 | Finite Element Methods | semester 1 | 2004 | Universitas Muhammadiyah Surakarta Bachelor |
70 | Operations Management | semester 1 | 2004 | Universitas Muhammadiyah Surakarta Master |
71 | Mechanical Vibrations | semester 2 | 2003 | Universitas Muhammadiyah Surakarta Bachelor |
72 | Aerodynamics | semester 2 | 2003 | Universitas Muhammadiyah Surakarta Bachelor |
73 | Operations Management | semester 2 | 2003 | Universitas Muhammadiyah Surakarta Master |
74 | Engineering Dynamics | semester 1 | 2003 | Universitas Muhammadiyah Surakarta Bachelor |
75 | Finite Element Methods | semester 1 | 2003 | Universitas Muhammadiyah Surakarta Bachelor |
76 | Mechanical Vibrations | semester 2 | 2002 | Universitas Muhammadiyah Surakarta Bachelor |
77 | Aerodynamics | semester 2 | 2002 | Universitas Muhammadiyah Surakarta Bachelor |
78 | Engineering Dynamics | semester 1 | 2002 | Universitas Muhammadiyah Surakarta Bachelor |
79 | Finite Element Methods | semester 1 | 2002 | Universitas Muhammadiyah Surakarta Bachelor |
80 | Engineering Dynamics | semester 1 | 2001 | Universitas Muhammadiyah Surakarta Bachelor |
81 | Mechanical Vibrations | semester 2 | 2001 | Universitas Muhammadiyah Surakarta Bachelor |
82 | Finite Element Methods | semester 1 | 2001 | Universitas Muhammadiyah Surakarta Bachelor |
83 | Production Management | semester 1 | 2001 | Universitas Muhammadiyah Surakarta Bachelor |
84 | Aerodynamics | semester 2 | 2000 | Universitas Muhammadiyah Surakarta Bachelor |
85 | Mechanical Vibrations | semester 2 | 2000 | Universitas Muhammadiyah Surakarta Bachelor |
86 | Calculus 3 | semester 1 | 2000 | Universitas Muhammadiyah Surakarta Bachelor |
87 | Engineering Dynamics | semester 1 | 2000 | Universitas Muhammadiyah Surakarta Bachelor |
No | Nama Lembaga | Posisi | Tahun |
---|---|---|---|
1 | Universiti Tun Hussein Onn Malaysia (UTHM) | Course Coordinator | Course Coordinator BDA340 |
2 | Universitas Muhammadiyah Surakarta | Head of Laboratory | 8/1/2001 - Date 8/10/2001 |
3 | Universitas Muhammadiyah Surakarta, Indonesia | Dean | 7/1/2002 - Date 7/1/2005 |
4 | Universiti Tun Hussein Onn Malaysia (UTHM) | Course Coordinator | 6/9/2015 - Date 16/1/2016 |
5 | Directorate of Higher Education, Indonesian Ministry of Education | Director | 6/10/2001 - Date 6/1/2002 |
6 | Universiti Tun Hussein Onn Malaysia (UTHM) | Course Coordinator | 4/9/2016 - Date 14/1/2017 |
7 | Universitas Muhammadiyah Surakarta, Indonesia | Vice Rector | 23/3/2005 - Date 17/10/2 |
8 | Universiti Tun Hussein Onn Malaysia (UTHM) | Course Coordinator | 22/2/2016 - 2/7/2016 |
9 | Universiti Tun Hussein Onn Malaysia (UTHM) | Course Coordinator | 22/2/2013 - Date 2/7/2013 |
10 | Universiti Tun Hussein Onn Malaysia (UTHM) | Course Coordinator | 1/9/2014 - Date 20/1/2015 |
11 | Universiti Tun Hussein Onn Malaysia (UTHM) | Course Coordinator | 1/9/2013 - Date 20/1/2014 |
12 | Universiti Tun Hussein Onn Malaysia (UTHM) | Course Coordinator | 1/9/2013 - Date 1/1/2014 |
13 | Universiti Tun Hussein Onn Malaysia (UTHM) | Course Coordinator | 1/9/2011 - Date 20/1/2012 |
14 | Universiti Tun Hussein Onn Malaysia (UTHM) | Course Coordinator | 1/9/2010 - Date 20/1/2011 |
15 | Universiti Tun Hussein Onn Malaysia (UTHM) | Course Coordinator | 1/9/2009 - Date 20/1/2010 |
16 | Universitas Muhammadiyah Surakarta, Indonesia | Vice Rector | 17/10/2005 - Date 1/11/20 |
17 | Autobody Manufacturing PT New Armada, Magelang, Indonesia | Manager | 1/5/1996 - Date 1/10/1996 |
18 | Universiti Tun Hussein Onn Malaysia (UTHM) | Course Coordinator | 1/2/2015 - Date 20/7/2015 |
19 | Universiti Tun Hussein Onn Malaysia (UTHM) | Course Coordinator | 1/2/2014 - Date 10/7/2014 |
20 | Universiti Tun Hussein Onn Malaysia (UTHM) | Course Coordinator | 1/2/2012 - Date 20/7/2012 |
21 | Universiti Tun Hussein Onn Malaysia (UTHM) | Course Coordinator | 1/2/2011 - Date 20/7/2011 |
22 | Universiti Tun Hussein Onn Malaysia (UTHM) | Course Coordinator | 1/2/2010 - Date 20/7/2010 |
23 | Universiti Tun Hussein Onn Malaysia (UTHM) | Head Sector Task FKMP | 1/1/2016 - Date 31/12/201 |
24 | Universiti Tun Hussein Onn Malaysia (UTHM) | Head Research Group | 1/1/2016 - Date 31/12/201 |
25 | Universiti Tun Hussein Onn Malaysia (UTHM) | Head of Panel | 1/1/2012 - Date 30/12/201 |
26 | Autobody Manufacturing PT New Armada, Magelang, Indonesia | Manager | 1/11/1996 - Date 1/2/1997 |
27 | Autobody Manufacturing PT New Armada, Magelang, Indonesia | Manager | 1/11/1996 - Date 1/2/1997 |
No Data Blog.